Austin Local

Concrete Contractor in Driftwood, TX

Spanish marble overlays and rubber surfacing systems for Driftwood driveways, pool decks, and patios.

Owner-ledTalk to Kyle directly
AustinLocal crew
7 days6 AM–7 PM

Free surface assessment

Tell us what you need

Concrete Resurfacing Contractor Serving Driftwood

Surface Werx is a concrete resurfacing contractor serving Driftwood, TX, specializing in pool deck resurfacing, driveway resurfacing, patio and walkway work, and commercial concrete surfaces. If your driveway is cracking, your pool deck is fading, or your patio looks like it belongs to a different decade, Kyle can resurface it with genuine Spanish marble or poured rubber systems rather than tearing it out entirely. That distinction matters: resurfacing costs a fraction of full replacement and delivers a finish most homeowners didn't know was available. Call (737) 283-9379 to get a straight answer on whether your surface qualifies.

Driftwood sits about 20 miles from our base, in unincorporated Hays County. That means permits for new concrete slabs and foundation work run through Hays County rather than a city office, and third-party inspections are required at foundation, framing, and completion stages for residential construction on vacant lots. The mapped soil in this area is Doss silty clay, a high-expansion clay profile that shifts seasonally and puts real stress on concrete slabs. Surfaces installed without accounting for that movement show it fast. It's one reason we evaluate the existing surface and site conditions before every project.

What a Concrete Contractor Does in Driftwood

Resurfaces worn driveways, pool decks, patios, and walkways without full tear-out
Installs genuine Spanish marble resin-bound overlays over prepared existing concrete
Applies poured rubber surfacing for pool decks and high-traffic areas
Evaluates slab condition and site drainage before recommending any system
Serves Driftwood and surrounding Hays County properties, about 20 miles from our base

Finished concrete patio with aggregate finish and marble coping bordering a swimming pool in a modern residential backyard.

Surfaces We Handle

Resurfacing Services Available in Driftwood

Every surface system is chosen based on what the existing concrete can support and what the space demands.

Pool Deck Resurfacing

Central Texas UV and heat break down pool deck coatings faster than most people expect. We resurface worn decks with slip-resistant Spanish marble or rubber systems that stay cooler underfoot and hold up to water exposure. No demolition, no weeks of downtime.

Driveway Resurfacing

Driftwood's expansive clay soil causes slabs to shift and crack as moisture levels change through the seasons. A properly prepared resurfacing job bonds to the existing concrete and gives you a finished surface that looks intentional rather than patched.

Patio Resurfacing

Outdoor living matters in this part of Hill Country. If your patio surface is spalling, stained, or just worn out, a Spanish marble overlay transforms it without the cost and mess of a full pour. Available in over 30 colors.

Walkway Resurfacing

Cracked or uneven walkways are both an eyesore and a liability. We resurface entry walks, garden paths, and side-yard routes with the same systems used on larger surfaces.

Garage Floor Resurfacing

Bare concrete garage floors absorb oil, dust, and moisture. A decorative overlay seals the slab, makes the space easier to clean, and holds up to vehicle traffic without chipping like paint.

Commercial Concrete Resurfacing

Retail strips, multifamily properties, and commercial entries in the Hays County area get the same systems on a larger scale. Surface Werx handles commercial applications without subcontracting the work.

Hill Country Conditions

Why Driftwood Soil Makes Concrete Work Harder

The Doss silty clay that covers most of Driftwood has high expansion potential. It swells when wet and contracts when dry, and in a climate with hot dry summers and unpredictable Hill Country rain events, that cycle repeats constantly. Plain concrete slabs that weren't designed for that movement develop cracks within a few years. That pattern shows up on driveways, patios, and pool surrounds, surfaces that sit directly on shifting ground with no buffer. Resurfacing doesn't fix a structurally failed slab, and we won't tell you it does. What it does is restore a surface that's cosmetically worn or showing surface-level cracking, and bond a system on top that handles normal movement better than bare concrete. If the slab needs structural repair first, we'll say so before we ever quote the overlay. That's the only way a job makes sense for either of us. Driftwood also sits in unincorporated Hays County, so if you're adding new concrete rather than resurfacing an existing slab, your permits go through the county. We can point you in the right direction, but the county handles its own inspection schedule and that's worth factoring into your timeline.

Finished concrete patio with decorative aggregate surface overlooking a pool and Lake Michigan waterfront.

Spanish Marble and Rubber: Two Systems Worth Knowing

Most homeowners in Driftwood have seen stamped concrete and standard pool deck paint. That's not what Surface Werx installs. The Spanish marble overlay is genuine marble aggregate bound in high-performance resin, hand-troweled to a smooth, seamless finish. It's water permeable by design, which matters on properties running on private septic and limited drainage infrastructure. It's not paint, it's not stamped concrete, and it's not imitation stone. The rubber surfacing system is poured in place and creates a resilient, slip-resistant finish that stays noticeably cooler than bare concrete in direct sun. For pool decks in particular, that's a real difference on a July afternoon. Both systems are available in over 30 colors and can be installed over properly prepared existing concrete, so you're not paying for demolition and disposal you don't need. If you're weighing options for an outdoor living space in Driftwood, those two systems cover most of what a finished exterior surface needs to do.

Finished concrete pool deck with aggregate finish surrounding a rectangular swimming pool in a residential backyard setting.

Driftwood and Surrounding Hays County Areas

Surface Werx serves Driftwood and neighboring communities throughout Hays County and the southern Hill Country corridor. If you're not sure whether your address falls in our range, call (737) 283-9379 and we'll give you a straight answer.

Concrete Resurfacing Questions from Driftwood Homeowners

Not covered here? Ask Kyle directly.(737) 283-9379

What concrete resurfacing services does Surface Werx offer in Driftwood?

Surface Werx resurfaces pool decks, driveways, patios, walkways, and garage floors in Driftwood using Spanish marble resin-bound overlays and poured rubber surfacing systems. We also handle commercial concrete resurfacing for Hays County properties. We don't pour new foundations or do structural concrete work; resurfacing existing eligible surfaces is our specialty.

Does Driftwood's expansive clay soil affect how concrete resurfacing is done?

Yes, and it's worth being direct about it. Driftwood sits on Doss silty clay, a high-expansion soil that moves with moisture changes and puts ongoing stress on slabs. Resurfacing bonds a new surface layer to existing concrete, but if the slab beneath has heaved or cracked structurally, that needs to be addressed first. We evaluate the existing surface before quoting any project.

Do I need a permit for concrete resurfacing in Driftwood, TX?

Driftwood is unincorporated, so permits for new concrete slabs and foundations go through Hays County rather than a city building department. Resurfacing an existing slab typically doesn't require a separate permit, but new pours do, and Hays County requires third-party inspections at foundation, framing, and completion stages for new residential construction. We'll flag what applies to your project during the evaluation.

What's the best concrete finish for a Driftwood pool deck or patio?

For pool decks in the Hill Country heat, poured rubber surfacing is worth considering: it's slip-resistant, stays cooler than bare concrete in direct sun, and handles water exposure well. Spanish marble overlays work well on patios and driveways where you want a finished appearance that's closer to natural stone. Both are water permeable, which matters on properties with private septic and limited drainage infrastructure.

How much does concrete resurfacing cost in Driftwood?

Cost depends on the surface area, its current condition, the system being installed, and the prep work required. The Doss silty clay in this area sometimes means additional prep before an overlay can bond correctly. Every job is different. Contact Surface Werx at (737) 283-9379 for an accurate estimate.

Is concrete resurfacing better than full replacement for a cracked Driftwood driveway?

If the slab is structurally sound but showing surface cracking, spalling, or cosmetic wear, resurfacing is almost always the smarter call: less cost, less disruption, no haul-away of broken concrete. If the slab has heaved or separated significantly from soil movement, full replacement may be the only real option. We'll tell you which one applies after we see it.

How long does concrete take to cure in the Driftwood climate?

Standard concrete cures to usable strength in about 24 to 48 hours but reaches full strength closer to 28 days. Central Texas heat accelerates the early phase but can cause surface cracking if the slab dries out too fast during the first 24 hours. For resurfacing overlays specifically, cure time depends on the system; we'll give you a clear timeline before we leave the job.

In the field

A look at our work

Decorative concrete patio with colored rubber surface and pink sculptural archway features in a public playground park setting.

Ready to Resurface? Call Kyle in Driftwood.

Surface Werx serves Driftwood and Hays County for pool deck, driveway, patio, and commercial concrete resurfacing.

Call (737) 283-9379 Request an estimate

Next step

Tell us about the job

Your name, your number and what needs doing. A person from Surface Werx gets back to you.

Rather talk now?(737) 283-9379